Preventative Maintenance Plans
A machine that is down for even a few hours can be costly. The key to maintaining CNC machine up time is the key to preventing down time. We provide the highest quality service your maintenance budget dollars can buy. Arrange Preventive Maintenance during your plant shut down times to minimize down time. Wise Precision Solutions can provide these services 24/7. We tailor our preventive maintenance to suit your company needs. Prevent CNC Machine down time and substantial financial loss with knowledgeable and reliable service. It is important to protect your CNC Machine investment with regular Preventive Maintenance Services. We recommend regular Preventive Maintenance service every 6 months. We offer additional programs simply contact us to inquire.
We offer two service plans for preventative maintenance.
We require a 4 hour minimum on labor. Travel and mileage are based on the location that the field, or service tech has to travel from. If an overnight stay is required, this will be charged to the customer.
Yearly Program
- Labor: 85.00/hr per visit
- Travel 55.00/hr
- mileage .55/mi
6 month program
- Labor: 75.00/hr per visit
- Travel 55.00/hr
- mileage .55/mi
PREVENTIVE MAINTENANCE
Machine Alignment:
1. Check and Adjust Machine Level.
2. Check all axis travel
3. Check and Adjust Backlash Settings
4. Remove Gibbs, Clean, Inspect and Readjust
5. Install new way wipers
6. Inspect and Adjust All Straps
7. Inspect Turcite on Table/Saddle
Way Oil System Maintenance:
8. Check pump for proper operation, pressure etc.
9. Clean Tank and Change Filter
10. Inspect all way oil lines
11. Change way oil manifolds or way oil injectors
Pneumatic System Maintenance:
12. Check air regulator for leaks or faulty seals
13. Check solenoids and air valves for leakage or malfunction
14. Drain and clear water trap on air line filter
15. Drain, clean and refill lubrication
16. Check main pressure ATC Maintenance
17. Remove covers and clean
18. Check and adjust alignments
19. Check slide and turret operation, and lubricate
Spindle System Maintenance:
20. Check spindle belts
21. Check spindle temperature and adjust chiller card
22. Check chiller system and adjust, and clean pump filter, fill if necessary
23. Check drawbar for proper retention and pressure at tool in/out (USE SVT0066)
24. Check and adjust spindle tram
25. Change Spindle Motor filter if applicable
Electrical System Maintenance:
26. Check all connections, wires, boards, connectors etc…
27. Check and adjust sin/cos on clock card (DC machines only)
28. Check ground integrity
29. Adjust position loop gain
Miscellaneous:
30. Check and clean all fans for proper operation
31. Check and fill all fluid levels
32. Check and adjust rigid tapping if applicable
33. Check scales if applicable
Preventive Maintenance Service runs approximately 8 to 10 hours depending on the size, condition and last service period of the equipment.
Our customers are responsible for providing all fluids filters and metering units as needed at time of PM service. Our technicians will be happy to assist you on a check list.